OTT Dyno Data

Stock vs. OTT, on the Dyno

Every OTT tune is developed and validated on OTT’s in-house dynamometers and on the road. These are OTT’s own Dynojet charts: on most, the red line is the truck on its stock calibration and the blue line is the OTT tune, on the same fuel.

OTT tunes for the broadest torque curve, not a headline number — so read the whole curve, not just the peak.

1GR-FE 4.0L V6

Naturally aspirated · 91 octane

Applies to
2007–2009 FJ Cruiser · 2007–2013 Tundra 4.0L
On the dyno
2nd Gen Tacoma 4.0L
RunPeak torquePeak power
Stock calibration224 ft-lb@ 3,990 rpm191 hp@ 5,370 rpm
OTT calibration240 ft-lb@ 3,700 rpm201 hp@ 5,080 rpm
Peak gain+16 ft-lb+10 hp
Dynojet chart, 1GR-FE 4.0L V6 Naturally aspirated: Stock calibration 224 ft-lb, 191 hp; OTT calibration 240 ft-lb, 201 hp

3UR-FE 5.7L V8

Naturally aspirated · 91 octane

Applies to
2007–2021 Tundra 5.7L · 2008–2022 Sequoia 5.7L · 2008–2021 Land Cruiser / LX570
On the dyno
2nd Gen Tundra 5.7L
RunPeak torquePeak power
Stock calibration319 ft-lb@ 3,800 rpm292 hp@ 5,620 rpm
OTT calibration346 ft-lb@ 3,650 rpm301 hp@ 5,660 rpm
Peak gain+27 ft-lb+9 hp
Dynojet chart, 3UR-FE 5.7L V8 Naturally aspirated: Stock calibration 319 ft-lb, 292 hp; OTT calibration 346 ft-lb, 301 hp

3UR-FE 5.7L V8

TRD / Magnuson supercharger · 91 octane

Applies to
2007–2021 Tundra 5.7L, supercharged · 2008–2022 Sequoia 5.7L, supercharged · 2008–2021 Land Cruiser / LX570, supercharged
On the dyno
2nd Gen Tundra 5.7L, TRD supercharged
RunPeak torquePeak power
Stock Magnuson S/C calibration445 ft-lb@ 3,830 rpm417 hp@ 5,810 rpm
OTT calibration468 ft-lb@ 3,810 rpm458 hp@ 5,950 rpm
Peak gain+23 ft-lb+41 hp
Dynojet chart, 3UR-FE 5.7L V8 TRD / Magnuson supercharger: Stock Magnuson S/C calibration 445 ft-lb, 417 hp; OTT calibration 468 ft-lb, 458 hp

2UZ-FE 4.7L V8

Naturally aspirated · 91 octane

Applies to
2005–2009 Tundra 4.7L · 2005–2009 4Runner 4.7L · 2005–2009 Sequoia 4.7L
On the dyno
1st Gen Tundra 4.7L
RunPeak torquePeak power
Stock calibration249 ft-lb@ 4,160 rpm216 hp@ 5,180 rpm
OTT calibration270 ft-lb@ 3,410 rpm222 hp@ 5,220 rpm
Peak gain+21 ft-lb+6 hp
Dynojet chart, 2UZ-FE 4.7L V8 Naturally aspirated: Stock calibration 249 ft-lb, 216 hp; OTT calibration 270 ft-lb, 222 hp

Dyno charts © Overland Tailor Tuning, published with permission. Figures are the peaks printed on each Dynojet sheet (SAE correction, smoothing 5), rounded to the nearest whole number. Results vary by dyno, conditions, modifications and the individual truck — these are OTT’s test vehicles, not a guarantee for yours. Where one chart covers several vehicles, it’s because OTT publishes that chart for each of them; the truck actually on the dyno is listed on the card.

Get Your Truck Tuned

Book a spot at an OTT Tune Day near you, or schedule the tune at our Grandview shop.

Ready to Build a Rig That Takes You Further?

Tell us about your vehicle and your adventures — we'll build the plan.