Description
- For any lift height, or no lift. These are OE replacement bushings
- Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
- Pressing of OE bushings may be necessary during removal and installation
- Replaces OE bushings in all 6 positions of rear leaf springs
—
Dobinsons Spring & Suspension rear polyurethane leaf spring bush kit for 2007 to 2019 Toyota Tundra. Replaces OE bushes with high quality polyurethane for maximum vibration dampening and best cabin comfort. Bushes have unique internal diamond grease traps to maximize bush life and reduce squeaking or noise. These replace the OE bushing, or the bushing that is supplied with some leaf spring manufacturers which are prone to squeaking. Kit contains 6 bushes, for the fixed end and both shackle ends of each leaf spring (6 positions total). Only one kit is required per vehicle. Grease injected into the pin (sold separately, SP59-060) will push grease between the outer edge of the bolt and the inside of the bushing, and also around the outside flange between the bushing and the spring hanger. This provides maximum lubrication and resistance to any friction, as well as eliminating any noise. This design of bushing will hold grease for longer than usual. Incorporating a recessed twin hole greasable design to ensure both halves of the polyurethane bush receive even grease distribution. Greasing polyurethane bushes not only reduces friction and wear, it also reduces the chances of corrosion on the shackle pins and reduces squeaking. Dobinsons 4×4 pins are a heavy duty design and provide simple servicing through external grease nipples. Note: Photo may not be of actual product, it is used for color and detail only
