Description
- Complete kit for both left and right hand side, includes new ball joints (Pressed), OE style rubber frame bushings (installed), and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- For replacement ball joints click (HERE)
- For replacement bushings click (HERE)
- Includes
- UCA59-003K (Pair)
- BJ59-003 (Pair)
- Pressing Service
Instructions
—
Dobinsons front upper control arm set. This will ONLY work on a vehicle lifted 1.5″ or more, due to the built-in 3 degrees of caster. This will fit all 4×4 Toyota Tacoma from 2005 to 2019, Toyota Hilux Vigo and Revo from 2005 to 2019, and Toyota Fortuner 2005 to 2019 These will be noise-free as they use rubber bushings and a factory style ball joint, made by Sankei in Japan. No greasing is necessary after installation.
